Commercial Carpet & Carpet Tile Installation in San Francisco
From single offices to full-building carpet programs. Local warehouse, local crews, 45 years of experience.
Why Peacock for Commercial Carpet
Carpet projects almost always run on a deadline. A new tenant is moving in, a lease is turning over, or a building manager wants the lobby refreshed before a board walk-through. Distributors and out-of-town contractors quote two to three weeks of lead time before they can even start. Peacock keeps Interface, Mohawk, Shaw, and Patcraft inventory on the floor of our SF warehouse, which means we can pull, cut, and stage in the same week you call.
Carpet tile is the workhorse of commercial flooring. It hides traffic patterns, lets you replace damaged sections instead of the whole floor, and works in offices, lobbies, and common areas. Where a seamless look matters (executive suites, conference rooms), broadloom is still the right call. We install both, often in the same project, and we manage the demo, disposal, and subfloor prep so the GC does not have to coordinate three trades.
Most of our carpet work happens after hours and on weekends so tenants are not displaced. Our crews show up at 6pm, work through the night, and the floor is open by morning.
What does commercial carpet installation in San Francisco actually involve?
A commercial carpet installation in San Francisco is rarely just "roll out carpet." A typical scope includes a walk-through and measure, product and dye-lot sourcing, coordination with building management around freight elevators and after-hours access, demo and disposal of existing flooring, moisture and flatness testing on the substrate, patch and skim coat where needed, install of pad or direct-glue carpet tile, punch list, and final protection so the finish trades don't damage the new floor.
In SF, the extra variables are freight elevator windows in high-rises, tenant coordination in occupied buildings, seismic-related slab movement in older Class B and C buildings, and moisture in slab-on-grade ground floors near the waterfront. A local installer who has seen those conditions before will price and schedule around them; an out-of-area contractor typically discovers them mid-project.
What affects the cost of a commercial carpet installation?
Every SF carpet project is priced on its own scope, so instead of a single number, it helps to look at the cost drivers. The biggest ones are carpet type and grade (broadloom vs carpet tile, mill and construction), square footage, subfloor condition and required prep (patch, skim, self-leveling underlayment), moisture testing and any remediation on slab-on-grade floors, old carpet removal and disposal, and the installation method (glue-down vs stretch-in).
After that, the building itself moves the number: freight elevator time, badge-in access, furniture moves, and whether the work has to happen after hours or in phases around occupants. We break these out line by line on every estimate so property managers and general contractors can see exactly what is driving the number. For pricing on your specific space, request a free estimate.
Broadloom vs carpet tile: which is right for your SF office?
For most tenant-improvement and open-office work in San Francisco, carpet tile is the safer specification. Tiles let you replace damaged sections instead of the whole floor, they accommodate floor boxes and future cable pulls, and warehoused attic stock protects you if a mill discontinues the pattern. Modular install also lets you phase suite-by-suite without shutting the tenant down.
Broadloom is still the right choice in executive suites, conference rooms, hospitality spaces, and rooms where acoustics matter. The seamless look reads more residential and premium, and the underlayment options give you better sound absorption. We install both, often together on the same floor. For a deeper look at the tradeoffs, see our carpet tile vs broadloom for offices guide, or the underlying commercial carpet tile service page.
What determines the project timeline?
Timeline is driven by the same factors as cost, plus a few site-specific ones. The main levers are square footage, the amount of prep required (moisture testing, patching, self-leveling), whether the space is occupied or vacant, freight elevator availability in high-rises, and whether the work has to be phased around tenants, staff, or a live operation.
A straightforward field of carpet tile in a vacant space installs quickly. A phased, after-hours install across multiple floors with active tenants runs longer by design so no one is displaced. We flag the schedule variables on the walk-through and build them into the plan up front, instead of running into them on install day.
Do you handle old carpet removal and floor prep?
Yes. Most of our SF commercial carpet projects include demo and haul-off of the existing floor, moisture and flatness testing on the substrate, patch and skim coating where needed, and, on ground-floor slabs near the waterfront, moisture remediation before we lay a single tile. Handling demo, prep, and install under one scope means the general contractor or property manager isn't coordinating three trades to get one floor done.
Do you install after hours and on weekends?
Yes. The majority of our commercial carpet work in San Francisco runs nights and weekends so tenants and staff are never disrupted. Our crews are used to overnight windows, badge-in access, and freight elevator reservations in Class A high-rises. On multi-floor programs we sequence work so each floor is finished, protected, and ready for use before staff arrive.
The short answer
Commercial carpet installation in San Francisco covers carpet tile, broadloom, stair carpet, and carpet replacement across offices, lobbies, healthcare, hospitality, education, and government buildings. Peacock Floors has done this work in SF since 1981 as an LBE, WBE, and SBE certified contractor. Installed cost depends on carpet grade, square footage, subfloor prep, removal and disposal, installation method, and whether the work runs after hours — not a single per-foot number.
Timelines are driven by the same factors, plus freight elevator windows and whether we can work on a vacant space or have to phase around tenants. Our 16,000 square foot Bayview warehouse stocks Interface, Shaw Contract, Mohawk Group, and Bentley inventory so we can mobilize quickly instead of waiting on factory lead times, and San Francisco carpet installers who already know the buildings.
For deeper product detail, see our commercial carpet tile service page, or request a free estimate and we will walk the space.
Carpet Tile
Modular installation, easy spot replacement, full pattern catalog from major mills.
Broadloom Carpet
Seamless look for executive suites, conference rooms, and high-end common areas.
Carpet Replacement
Demo, haul-off, subfloor prep, and new install handled in one scope.
Stair Carpet & Treads
Commercial-grade stair solutions sized to your treads and risers.
After-Hours Installation
Nights and weekends so your tenants and staff are never disrupted.
Maintenance Programs
Ongoing carpet care, spot replacement, and warranty service.
Peacock handled our entire floor turnover after hours — carpet tile through the open areas and broadloom in the executive suites. The space was ready for tenants Monday morning. No drama, no surprises.— SF Commercial Property Manager
Schedule a Walk-Through
Tell us about your carpet project. We respond within one business day — straight from the team that will be on site.
415-818-1754Frequently Asked Questions
How long does a typical commercial carpet installation take?
Timeline depends on square footage, subfloor prep, whether the space is occupied, freight elevator windows, and whether the install has to be phased around tenants. A straightforward vacant space installs quickly; a phased after-hours install runs longer by design so no one is displaced. We build the schedule on the walk-through.
Do you handle furniture moves and existing carpet removal?
Yes. Our scope can include lift-and-shift of systems furniture, removal and disposal of existing carpet or VCT, moisture and flatness testing, patch and skim of the substrate, and final install plus punch.
Carpet tile or broadloom for an SF office?
For most SF tenant-improvement and corporate offices we recommend carpet tile because damaged tiles can be swapped out individually, replacement stock can be warehoused, and modular install allows wire and floor-box access. Broadloom still makes sense in executive offices, hospitality, and acoustic-sensitive rooms.
Can you match an existing carpet pattern for a partial-floor install?
Often yes, if the original product is still in production or close-out. We pull attic stock from your facility, identify the manufacturer and style, and source matching dye lots before scheduling so the patched area blends with the existing field.
Do you carry inventory locally?
Yes. We stage common carpet tile and adhesives in our 16,000 sq ft Bayview warehouse so we can mobilize quickly for SF projects without waiting on factory lead times.
Related Reading
Related pages and articles on commercial carpet installation: